Exhaust Temperature Sensor 1/1

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the engine cover (1).

Fig 2: Upstream Exhaust Temperature Sensor Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the upstream exhaust temperature sensor 1/1 wire harness connector (1).

Fig 3: Upstream Exhaust Temperature Sensor, Wire, Bracket & Connector
Courtesy of CHRYSLER GROUP, LLC

NOTE:
The heat shield is removed for clarity.
Detach the upstream exhaust temperature sensor 1/1 wire (1) from heat shield (2).
Detach the upstream exhaust temperature sensor 1/1 wire harness connector (3) from bracket (4).
Remove the upstream exhaust temperature sensor 1/1 (5).