LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Exhaust System) >> Sensor, Exhaust Temperature, 2.0L Diesel >> Installation >> Exhaust Temperature Sensor 1/2

Exhaust Temperature Sensor 1/2

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Downstream Exhaust Temperature Sensor & Connector
GC0153960Courtesy of CHRYSLER GROUP, LLC
  1. Install the downstream exhaust temperature sensor 1/2 (2) and tighten to 45 N.m (33 ft. lbs.).
  2. Attach the downstream exhaust temperature sensor 1/2 wire harness connector (1) to bracket.
  3. Connect the downstream exhaust temperature sensor 1/2 wire harness connector.
    Fig 2: Engine Cover
    GC0148021Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover (1).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals