Injector(S), Fuel: Installation: 3.6L

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: O-Ring Seals

Courtesy of CHRYSLER GROUP, LLC

Lightly lubricate new O-ring seals (1) with engine oil and install on the fuel injector (2).

Fig 2: O-Ring Seals & Fuel Injector
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Number 2 fuel injector installation shown in illustration, all other fuel injectors similar.
Install the fuel injectors (1) to the fuel rail (2).

Fig 3: Fuel Rail Bolt Tightening Sequence
Courtesy of CHRYSLER GROUP, LLC
Install the fuel rail, upper inlet manifold and air inlet hose. Refer to RAIL, FUEL, INSTALLATION .
Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
Start the engine and check for leaks.