Tube, Fuel Tank Filler: Removal: AWD
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER GROUP, LLC
| 1 - canister filter line quick connect fitting |
| 2 - recirculation line quick connect fitting |
| 3 - fuel filler tube |
| 1 - canister filter line quick connect fitting |
| 2 - recirculation line quick connect fitting |
| 3 - fuel filler tube |
- Disconnect and isolate negative battery cable at battery.
- Remove fuel cap.
- Remove the inner splash shield. Refer to
SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL
.
- Disconnect the quick connect fitting (1) and remove the canister filter line. Refer to FITTING, QUICK CONNECT
.
- Disconnect the quick connect fitting (2) and remove the recirculation line. Refer to FITTING, QUICK CONNECT
.
- Loosen the hose clamp and remove the fuel filler tube (3) from the fuel tank.
Courtesy of CHRYSLER GROUP, LLC
| 1 - filler tube mounting bracket bolt |
| 2 - filler tube mounting bracket |
| 3 - filler tube mounting bracket body mount |
| 1 - filler tube mounting bracket bolt |
| 2 - filler tube mounting bracket |
| 3 - filler tube mounting bracket body mount |
- Remove filler tube mounting bracket bolt (1) from bracket (2) and body mount (3).
Courtesy of CHRYSLER GROUP, LLC
| 1 - fuel door housing assembly |
| 2 - fuel filler tube |
| 1 - fuel door housing assembly |
| 2 - fuel filler tube |
- Remove fuel filler tube (2) from the fuel door housing assembly (1).