Rail, Fuel: Installation: 2.4L

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Injector And Rail

Courtesy of CHRYSLER GROUP, LLC

Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
Install injector into cup of fuel rail.

Fig 2: Fuel Injector On Rail
Courtesy of CHRYSLER GROUP, LLC
Install retaining clip and check to ensure injector is properly captured in the fuel rail assembly.

Fig 3: Rail Removal/Install
Courtesy of CHRYSLER GROUP, LLC
Insert fuel injector nozzles into openings in intake manifold. Seat the injectors in place.

Fig 4: Electrical Harness Removed
Courtesy of CHRYSLER GROUP, LLC
Install the 2 bolts to the fuel rail. Tighten fuel rail bolts to 27 N.m (20 ft. lbs.).

Fig 5: Harness Clips
Courtesy of CHRYSLER GROUP, LLC
Install wiring harness clips to the fuel rail mounting studs.

Fig 6: Fuel Injector Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Connect and lock the electrical connectors to the fuel injectors.

Fig 7: Fuel Line At Rail
Courtesy of CHRYSLER GROUP, LLC
Connect the fuel line to the fuel rail. Refer to FITTING, QUICK CONNECT .
Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).
Use the scan tool ASD Fuel System Test to pressurize the fuel system. Check for leaks.
Install engine cover.