LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Vehicle Quick Reference) >> Capacities And Recommended Fluids >> Specifications >> Fluids, Lubricants And Genuine Parts

Fluids, Lubricants And Genuine Parts

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System 
(1) Engine Coolant (2.0L Engines with Single or Dual-Zone Climate Control System) MOPAR® PARAFLU Antifreeze/Coolant 10 Year 150, 000 Mile Formula OAT (Organic Additive Technology) MS-12106 7.7 Quarts 7.3 Liters
(1) Engine Coolant (2.4L Engine with Single or Dual-Zone Climate Control System) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 10.7 Quarts 10.1 Liters
(1) Engine Coolant (2.4L Engine with Three-Zone Climate Control System) 11.6 Quarts 11.0 Liters
(1) Engine Coolant (3.6L Engines with Single or Dual-Zone Climate Control System) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 13.1 Quarts 12.4 Liters
(1) Engine Coolant (3.6L Engine with Three-Zone Climate Control System) 14.5 Quarts 13.7 Liters
Engine Oil with Filter 
(2) Engine Oil (2.0L Diesel Engine) MOBIL 1® SAE 5W-30 Low Ash Fully Synthetic oil, meeting the requirements of ACEA C2 1 Quart - 05166241AA 5.5 Quarts 5.2 Liters
(2) Engine Oil (2.4L Engine) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Group LLC Material Standard MS-6395. 1 Quart - 04761872PA 4.5 Quarts 4.26 Liters
5 Quarts- 04761851PA
(2) Engine Oil (3.6L Engine) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Group LLC Material Standard MS-6395. 1 Quart - 04761872PA 6 Quarts 5.6 Liters
5 Quarts- 04761851PA
Engine Oil Filter (2.0L Diesel Engine) MOPAR® Engine Oil Filter 68096455AA N/A N/A
Engine Oil Filter (2.4L Engine) MOPAR® Engine Oil Filter 4892339AA N/A N/A
Engine Oil Filter (3.6L Engine) MOPAR® Engine Oil Filter Kit 68191349AA N/A N/A
Fuel (approximate) 
Fuel Selection (2.4L and 3.6L Engine) 87 Octane or higher Unleaded N/A FWD - 20.5 Gallons FWD - 77.6 Liters
AWD - 21.1 Gallons AWD - 79.8 Liters
Fuel Selection (2.0L Diesel Engines) Use only the best quality fuel with a calculated Cetane Index of 50 or higher. In addition, the manufacturer recommends using diesel fuel with a sulfur content of less than or equal to 15 ppm.  N/A 20.5 Gallons 77.6 Liters
A/C Refrigerant System 
Refrigerant R-134a 82300101AB 22 Ounces - Single 0.624 Kilograms - Single
32 Ounces - Dual 0.907 Kilograms - Dual
(1) System fill capacity includes heater and coolant recovery bottle filled to MAX level.
(2) For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (2.4L Engine) NGK® Nickel 04606823AB (ZFR5F-11) 0.043 in 1.10 mm
Spark Plugs (3.6L Engine) Champion® SP149125AD (RER8ZWYCB4) 0.043 in 1.10 mm
TRANSMISSION

Description Type Part Number Capacities
U.S. Metric
Automatic 
40TE/41TE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 4.0 Quarts 3.8 Liters
1 Gallon - 05013458AA
(1) 40TE/41TE- Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 9.2 Quarts 8.7 Liters
1 Gallon - 05191185AA
62TE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 5.5 Quarts 5.2 Liters
1 Gallon - 05191185AA
(1) 62TE - Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 9.0 Quarts 8.5 Liters
1 Gallon - 05191185AA
Manual 
C635 - Service Fill Castrol BOT - 350 1 Quart - 68092630AA 1.8 Quarts 1.7 Liters
1 Gallon - 68092636AA
(1) Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

TRANSFER CASE

Description Type Part Number Capacities
U.S. Metric
(1) Power Transfer Unit MOPAR® Synthetic Gear & Axle Lubricant SAE 75W-90 1 Quart - 05010320AA 1.7 Pints 0.8 Liters
(1) Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

CHASSIS

Description Type Part Number Capacities
U.S. Metric
Axles (Rear) 
(1) Rear Driveline Module MOPAR® Gear & Axle Lubricant SAE 75W-90 1 Quart - 04874468 16.2 Ounces 0.6 Liters
Chassis Systems 
(2) Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
(2) Brake/Clutch Master Cylinder
(3) Power Steering Reservoir MOPAR® Power Steering Fluid +4 1 Quart - 05013457AA N/A N/A
(1) Approximate dry fill or fill to bottom edge of fill plug hole.
(2) If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (P/N 04549625AC), is acceptable.
(3) If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.