Diagnosis And Testing - Power Window Switch
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
For switch testing, remove the switch. Refer to SWITCH, POWER WINDOW, REMOVAL . Using an ohmmeter, refer to Window Switch Continuity Tables to determine if continuity is correct. If the results are not obtained, replace the switch.
The master window switch has an Auto-Down feature. Actuation of the master switch to the second down position will move the drivers side window completely down. The electronic switch will automatically disconnect the motor approximately one second after the window bottoms out. Failure of the electronic switch to detect stall current, will cause the switch to disconnect after approximately 13 seconds. The auto down function can be canceled by any movement of that switch.
MASTER WINDOW SWITCH TEST
| SWITCH POSITION | CONTINUITY BETWEEN |
|---|---|
| OFF | 5/13 AND 2 |
| 5/13 AND 3 | |
| 5/13 AND 6 | |
| 5/13 AND 7 | |
| LEFT FRONT UP-NON EXPRESS | 1 AND 10 |
| LEFT FRONT DOWN-NON EXPRESS | 1 AND 9 |
| RIGHT FRONT UP-NON EXPRESS | 1 AND 12 |
| RIGHT FRONT DOWN-NON EXPRESS | 1 AND 14 |
| LEFT REAR UP | 1 AND 2 |
| LEFT REAR DOWN | 1 AND 3 |
| RIGHT REAR UP | 1 AND 6 |
| RIGHT REAR DOWN | 1 AND 7 |
| LOCKOUT SWITCH (SWITCH NOT DEPRESSED) | 1 AND 4 |
PASSENGER WINDOW SWITCH TEST
| SWITCH POSITION |
CONTINUITY BETWEEN |
RESISTANCE VALUE |
|---|---|---|
| UP | 4 AND 9 | 330 ? ± 10% |
| DOWN | 4 AND 9 | 3000 ? ± 10% |