LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> 2.4L >> Cylinder Block Mounted

Cylinder Block Mounted

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECT Sensor
GC0128547Courtesy of CHRYSLER GROUP, LLC
1 - ECT
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor.
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor.