LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> 2.4L >> Coolant Adapter Mounted

Coolant Adapter Mounted

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECT Sensor & Coolant Adapter
GC0128548Courtesy of CHRYSLER GROUP, LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor (1).
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor (1).
scientia non olet · About LEMON Manuals