TENSIONER, Belt: Removal: 2.4L
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER STEERING PUMP |
| 2 - ACCESSORY DRIVE BELT |
| 3 - GENERATOR |
| 4 -AIR CONDITIONING COMPRESSOR |
| 5 - LOWER IDLER PULLEY |
| 6 - CRANKSHAFT PULLEY |
| 7 - WATER PUMP PULLEY |
| 8 - ACCESSORY DRIVE BELT TENSIONER |
| 9 - UPPER IDLER PULLEY |
- Raise the vehicle on a hoist.
- Remove the belt splash shield.
- Remove the accessory drive belt (2). Refer to BELT, SERPENTINE, REMOVAL .
- Remove the accessory drive belt tensioner mounting bolt. Remove accessory drive belt tensioner (8).