LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.6L

TENSIONER, Belt: Installation: 3.6L

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measurement A
GC0144244Courtesy of CHRYSLER GROUP, LLC
  1. An indexing slot is located on back of tensioner. Align this slot to the head of the bolt on the front cover. Install the mounting bolt. Tighten bolt to 41 N.m (30 ft. lbs.).
  2. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  3. Check belt indexing marks.
  4. Install the air intake system. Refer to BODY, AIR CLEANER, INSTALLATION .
  5. Connect the negative battery.
scientia non olet · About LEMON Manuals