TENSIONER, Belt: Installation: 2.4L
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER STEERING PUMP |
| 2 - ACCESSORY DRIVE BELT |
| 3 - GENERATOR |
| 4 - AIR CONDITIONING COMPRESSOR |
| 5 - LOWER IDLER PULLEY |
| 6 - CRANKSHAFT PULLEY |
| 7 - WATER PUMP PULLEY |
| 8 - ACCESSORY DRIVE BELT TENSIONER |
| 9 - UPPER IDLER PULLEY |
- Position the accessory drive belt tensioner (8) and install mounting bolt. Tighten bolt to 20 N.m (15 ft. lbs.).
- Install the accessory drive belt (2). Refer to BELT, SERPENTINE, INSTALLATION .
- Install the belt splash shield.
- Lower the vehicle.