LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Removal >> 3.6L

Pulley, Idler: Removal: 3.6L

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Belt Tensioner, Accessory Drive Belt
GC0147003Courtesy of CHRYSLER GROUP, LLC
  1. Remove main drive belt (7). Refer to BELT, SERPENTINE, REMOVAL .
  2. Lower vehicle.
  3. Remove the air intake system.
  4. Remove the mounting bolt holding the idler pulley (2).
scientia non olet · About LEMON Manuals