LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (3.6L - DTCS P2135 To U1418) >> Diagnosis And Testing >> U0300-Internal Control Module Software Incompatibility >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
PCM PROGRAMMED WITH INCORRECT SOFTWARE
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to .