When Monitored
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs once per ignition cycle when the following conditions are met:
- Shortly after an initial engine start.
- The difference between the coolant temperature and ambient air temperature is greater than 15°C (59°F) at initial engine start.
- The engine coolant temperature recorded at the last engine shut down was above 83°C (181.4°F).
- If the previous engine shut down temperature was not above this value, the shut down diagnostic will not be performed during this ignition cycle.
- There was a minimum of 10°C (50°F) temperature drop during the last ignition off.
- If the above monitoring conditions are met, the PCM uses the engine coolant temperature drop to calculate a maximum engine off time threshold. It then compares the previous key off time to the calibrated maximum threshold.