When Monitored
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs after the following enable conditions are met:
- Ambient temperature above -7°C (19.4°F).
- Battery voltage above 11.0 volts.
- Fuel level above 12%.
- With the engine running for more than 90.0 seconds.
- ECT temperature above 70°C (158°F).
- Catalytic Converter temperature between 500°C (932°F) and 850°C (1562°F).
- Upstream closed loop fuel control active.
- Once the enable conditions are met the vehicle must be driven under the following conditions:
- Engine speed above 1152 rpm.
- Vehicle speed above 64.4 km/h (60 mph).
- Throttle open for a minimum of 120 seconds.
- Immediately after a closed throttle Decel Fuel Shutoff (DFSO) Event.