When Monitored
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs when the following conditions are met:
- After an engine off time of greater than 480 minutes.
- At ignition on the:
- ambient temperature reading is greater than -64°C (-83.2°F).
- engine coolant temperature reading is greater than -64°C (-83.2°F).
- intake air temperature reading is greater than -64°C (-83.2°F).
- After the engine is started and the vehicle is driven above 48.3 kph (30 mph) for 30 seconds a determination is made.