When Monitored

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs when the following conditions are met:

Engine speed is at least 650 to 1400 RPM, depending on oil temperature.
Oil temperature is between -7°C to 139°C (19°F to 282°F).
Battery voltage is greater than 10.0 volts.
No CMP Sensor, CKP Sensor or OBDI plausibility errors.
Cam phasing is being commanded.