Standard Procedure - Fluid Drain And Fill

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Id Tag, Fill Plug And Drain Plug

Courtesy of CHRYSLER GROUP, LLC

1 - I.D. TAG

2 - FILL PLUG

3 - DRAIN PLUG

The fill (2) and drain (3) plugs (Fig 1) are both in the rear case. Correct fill level is to the bottom edge of the fill plug hole. Be sure the vehicle is level to ensure an accurate fluid level check.