LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Occupant Restraint Controller (Orc) - DTCS B1204 To B1C39) >> DTC Troubleshooting >> B1CDC-Passenger Occupant Detector Circuit High >> Notes

B1CDC-Passenger Occupant Detector Circuit High: Notes

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Passenger Occupant Detector Circuit Wiring Diagram
GC0149361Courtesy of CHRYSLER GROUP, LLC
NOTE:

The ORC module cannot recognize between the different faults so it will set a High code. The diagnosis is to check the ODS signal and return circuits for all faults (short to voltage, open, short to ground, and shorted together).

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article  .