LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Occupant Restraint Controller (Orc) - DTCS B1204 To B1C39) >> DTC Troubleshooting >> B1B56-1ST Row Passenger Seat Belt Sensor Circuit High >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

The ORC monitors the status of the seat belt switch circuits at power up and every 100 ms thereafter while the ignition is in on.

scientia non olet · About LEMON Manuals