LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Occupant Restraint Controller (Orc) - DTCS B1204 To B1C39) >> DTC Troubleshooting >> B1B56-1ST Row Passenger Seat Belt Sensor Circuit High >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

When powered, the Occupant Restraint Controller (ORC) sends a test current to the belt switches to verify the integrity of the switch and wiring. The use of the ORC connector adapter tool in the tests below provides a test point in place of the module.

scientia non olet · About LEMON Manuals