LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Occupant Restraint Controller (Orc) - DTCS B1204 To B1C39) >> DTC Troubleshooting >> B1B56-1ST Row Passenger Seat Belt Sensor Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets when the ORC detects the seat belt switch circuits have become shorted to voltage for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from the shorted to voltage condition for greater than five seconds.

scientia non olet · About LEMON Manuals