LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Tail Stop Turn >> Removal >> Bulb >> Notes

Lamp, Tail Stop Turn: Removal: Bulb: Notes

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Each rear lamp unit for this vehicle consists of two pieces. An outer rear lamp unit that is secured at the rear of each quarter panel includes either a single incandescent bulb or multiple Light-Emitting Diode (LED) units for the park (or tail) lamps, the brake (or stop) lamps and an incandescent bulb for the turn signal lamps. An inner rear lamp is secured on each outboard side of the liftgate outer panel adjacent to the outer lamp and also includes either a single incandescent or multiple LED units for the park (or tail) lamps as well as an incandescent bulb for the backup (or reverse) lamps. The incandescent bulbs are available for individual service replacement; however, if an LED unit is ineffective or damaged, the entire inner or outer rear lamp unit must be replaced.