LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Fog >> Removal >> Bulb

Lamp, Fog: Removal: Bulb

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.

Fig 1: Removing/Installing Bulb
GC0139120Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Reach behind the lower front fascia to access and disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle.
  3. Firmly grasp the bulb by the two latch features (2) and squeeze them together to unlock the bulb from the back of the front fog lamp housing (3).
  4. Pull the bulb straight out from the keyed opening in the housing.