LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 ((Amplifier (Amp) - Electrical Diagnostics - Base)) >> DTC Troubleshooting >> B146A-Channel 3 Audio Speaker Output Circuit Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will set if a Direct Current (DC) offset occurs on the output channel, the amplifier shall set a DTC after a maturity rate of 5 ±1 sec.

scientia non olet · About LEMON Manuals