Section 236 (Audio/Video/Entertainment/Connectivity (Service Information)): Speaker: Removal: Subwoofer
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Open the load floor cover and pull rearward and remove from the floor slots.
- Remove the mounting fasteners (1) and remove the speaker cover grille.
- Lift the subwoofer (2) straight up and remove.
- Disconnect the electrical connector.