Instrument Panel - Drivers Side

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: End Cap

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the instrument panel end cap (1).

Fig 2: Removing/Installing Steering Column Opening Cover
Courtesy of CHRYSLER GROUP, LLC
Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .

Fig 3: Lower Instrument Panel Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the driver side lower instrument panel retainer (1) next to the DLC connector.

Fig 4: Steering Column Opening Cover Retainers
Courtesy of CHRYSLER GROUP, LLC
Remove the instrument panel cover steering column opening cover retainers (1).

Fig 5: Speaker Mounting Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the speaker mounting fasteners (1).

Fig 6: Lower Speaker Mounting Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the driver side lower speaker mounting retainer (1).
Disconnect the speaker electrical connector.

Fig 7: Left Side Instrument Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the speaker by carefully pulling the left side of the instrument panel (1) outward until there is sufficient room to remove the speaker through the end cap area.