Diagnostic Test
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC SWAY-BAR SYSTEM (ASBS) INTERNAL FAILURE DTC PRESENT
- Turn the ignition on.
- With the scan tool, read DTCs.
- With the scan tool, erase DTCs.
- Cycle the ignition switch.
- With the scan tool, read DTCs.
Does the scan tool display ASBS INTERNAL FAILURE?
Yes
- Replace the Automatic Sway-Bar System (ASBS) in accordance with the Service Information.
- Perform the ASBS VERIFICATION TEST. Refer to ASBS VERIFICATION TEST .
No
- Perform the ASBS INTERMITTENT CONDITION TEST. Refer to STANDARD PROCEDURE .