LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 ((Wireless Control Module (WCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1A28-ECM Mismatch With Skim >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

When a PCM/ECM STATUS message with a Valid Key status is not received by the Wireless Control Module (WCM) within 3.5 seconds of transmitting the last Valid Key Code message to the PCM/ECM.