Diagnostic Test

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE:

Make sure the IOD fuse is installed and battery voltage is between 10 and 16 volts before proceeding.

With the scan tool, read active Cluster DTCs.
Is this DTC active?

Yes
- Refer to DIAGNOSIS AND TESTING and perform the U0141-LOST COMMUNICATION WITH IPM (FCM/TIPM) diagnostic procedure.
No
- Refer to DIAGNOSIS AND TESTING and perform the STORED LOST COMMUNICATION DTCs diagnostic procedure.