LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Heating & Air Conditioning (Service Information)) >> Distribution >> Housing, HVAC >> Removal >> Screen-Air Inlet

Screen-Air Inlet

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Passenger Side Cowl Panel & Air Inlet Screen
GC0131680Courtesy of CHRYSLER GROUP, LLC
NOTE:

LHD model shown. RHD model similar.

  1. Remove the HVAC housing assembly. Refer to HOUSING-HVAC, REMOVAL .
  2. Disengage the retaining tabs that secure the air inlet screen (1) to the passenger compartment side of the cowl panel (2).
  3. Pull the air inlet screen straight downward and remove the screen from the cowl panel.
scientia non olet · About LEMON Manuals