LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Clutch System) >> Pedal And Pad, Clutch >> Installation >> Installation

Pedal And Pad, Clutch: Installation: Installation

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place clutch pedal and bracket over studs on dash panel and cowl support. Install nuts and tighten to 39 N.m (29 ft. lbs.).
  2. Engage clutch master cylinder actuator on brake pedal pivot.
scientia non olet · About LEMON Manuals