LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Body - Interior & Exterior) >> Standard Procedure >> Plastic Body Panel Repair >> Safety Precaution And Warnings

Safety Precaution And Warnings

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Eye protection should be used when servicing components. Personal injury can result.
  • Use an OSHA approved breathing mask when mixing epoxy, grinding, and spraying paint or solvents in a confined area. Personal injury can result.
  • Avoid prolonged skin contact with resin, petroleum, or alcohol based solvents. Personal injury can result.
  • Do not venture under a hoisted vehicle that is not properly supported on safety stands. Personal injury can result.
NOTE:

  • When holes must be drilled or cut in body panels, verify locations of internal body components and electrical wiring. Damage to vehicle can result.
  • Do not use abrasive chemicals or compounds on undamaged painted surfaces around repair areas. Damage to finish can result.