LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Body - Interior & Exterior) >> Exterior >> Brace, Wheelhouse >> Removal >> Removal

Brace, Wheelhouse: Removal: Removal

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    Fig 1: Cowl Top Screen
    GC0128454Courtesy of CHRYSLER GROUP, LLC
  2. Remove the two push-pins (1) securing the cowl top screen at the ends. Remove the remaining push-pins (2). Remove the cowl top screen (3).
  3. Remove the wiper arms. Refer to ARM, WIPER, REMOVAL .
    Fig 2: Cowl Screen
    GC0128455Courtesy of CHRYSLER GROUP, LLC
  4. Remove the push-pins (1) securing the cowl screen to the wheelhouse brace and cowl. Rotate the screw (2) in the center of the cowl screen 90° clockwise to release the screen. Remove the cowl screen (3).
    Fig 3: Wheelhouse Brace
    GC0128486Courtesy of CHRYSLER GROUP, LLC
  5. Remove the eight mounting bolts (four each side) (1) securing the wheel house brace to the strut towers.
  6. Remove the wheelhouse brace (2).
scientia non olet · About LEMON Manuals