LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Body - Interior & Exterior) >> Diagnosis And Testing >> Water Leaks >> Repair Procedure For Bulkhead/Cowl Seams

Repair Procedure For Bulkhead/Cowl Seams

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the customer experiences a wet floor  at the front of the vehicle remove the instrument panel. Refer to PANEL, INSTRUMENT, REMOVAL .
  2. Remove the Cowl Trim. Refer to PANEL, COWL TRIM, REMOVAL .
    Fig 1: Bulkhead and Cowl seam sealer
    GC0148104Courtesy of CHRYSLER GROUP, LLC
  3. Inspect all Bulkhead (1) and Cowl (2) body seams for seam sealer skips.
  4. Apply Paintable Clear Seam Sealer to all seam sealer voids.
  5. Re-Install the instrument panel. Refer to PANEL, INSTRUMENT, INSTALLATION .
  6. Re-Install the Cowl Trim. Refer to PANEL, COWL TRIM, INSTALLATION .
scientia non olet · About LEMON Manuals