Seal, Crankshaft Oil, Rear: Removal: Removal
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
The rear crankshaft oil seal is incorporated into the seal retainer (2) and can not be removed from the retainer. The rear crankshaft oil seal and seal retainer (2) are serviced as an assembly.
- Remove the automatic transmission.
- Remove the flexplate.
- Remove the upper oil pan. Refer to PAN, OIL, REMOVAL .
- Remove the eight seal retainer attaching screws (1).
- Remove and discard the seal retainer (2).