Bulb - Headlamp - Domestic

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.

Fig 1: Identifying Headlamp Bulb (Domestic)

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Remove the headlamp unit (1) from the mounting collar (3). Refer to UNIT, HEADLAMP, REMOVAL .
Using the tabs on each side of the headlamp bulb connector receptacle (2), firmly grasp the bulb base and rotate it counterclockwise about 30 degrees to unlock it.
Pull the bulb and base straight out from the keyed opening in the headlamp unit.