LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, UNDERHOOD >> Removal >> Bulb

Lamp, UNDERHOOD: Removal: Bulb

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Underhood Lamp
GC0091926Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Insert a small flat bladed tool in the access slot between the underhood lamp housing (1) and the lamp lens (2).
  3. Gently pry the lens until it unsnaps from the lamp housing.
    Fig 2: Underhood Lamp Bulb Holder
    GC0091927Courtesy of CHRYSLER GROUP, LLC
  4. Depress the bulb holder (2) inward far enough to disengage the terminal loops (3) of the bulb (1) and remove the bulb from the lamp housing (4).
scientia non olet · About LEMON Manuals