LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Fuel System) >> Fuel Delivery, Diesel >> Standard Procedure >> Draining Fuel Tank >> Conventional Procedure

Conventional Procedure

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Due to a one-way check valve installed into the fuel fill fitting at the tank, the tank cannot be drained at the fuel fill cap.

  1. Disconnect the fuel feed line (2) quick-connect fitting. Refer to STANDARD PROCEDURE  .
  2. Install the appropriate Fuel Line Adapters / Fitting from the (special tool #8978A, Decay Tool, Fuel). Route the opposite end of this hose to an diesel fuel draining station.
    NOTE:

    Activation of the fuel pump module may time out and need to be restarted several times to completely drain the fuel tank.

  3. Using a diagnostic scan tool, activate the fuel pump until the fuel tank is empty.
scientia non olet · About LEMON Manuals