Tire Pressure Monitoring System
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
All Tire Pressure Monitoring System Faults are specific to one location. If a "BATTERY LOW" fault is detected it will cause a loss of signal fault. If a "SENSOR FAILURE" fault is detected, the location will be displayed (Premium Systems). The appropriate sensor/transmitter can then be replaced. If a single sensor/transmitter cannot be detected by the WCM, replace that sensor transmitter. If none of the sensors/transmitters can be detected, refer to symptoms in the WCM section. Refer to WIRELESS CONTROL MODULE (WCM) - ELECTRICAL DIAGNOSTICS . For additional system description and diagnosis, refer to TIRE PRESSURE MONITORING and the TIRE PRESSURE MODULE (TPM) - ELECTRICAL DIAGNOSTICS article.