LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C1082-02-Vacuum Pressure Sensor - General Signal Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

When the Anti-Lock Brake Module detects that the vacuum sensor signal does not make sense based on other vehicle conditions. No signal change, signal rapid change, unexpected change.