LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C1082-01-Vacuum Pressure Sensor - General Electrical Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The Vacuum Sensor Signal indicates that the voltage level is below 0.1 volt or greater than 3.5 volts for 100 msec.

scientia non olet · About LEMON Manuals