LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C0042-62-Brake Pedal Position Sensor - Signal Compare Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

If Anti-lock Brake System (ABS) Module sees brake pressure, but no corresponding with Brake Pedal Position (BPP) Sensor voltage for one second.

NOTE:

If any other DTCs are present, repair them first before continuing with this diagnostic procedure.

scientia non olet · About LEMON Manuals