LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C0042-11-Brake Pedal Position Sensor - Circuit Short To Ground >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
BRAKE PEDAL POSITION (BPP) SENSOR IMPROPERLY INSTALLED, DAMAGE OR MECHANICAL FAILURE
(B237) BPP SENSOR SUPPLY CIRCUIT OPEN OR HIGH RESISTANCE
(B137) BPP SENSOR SIGNAL CIRCUIT OPEN OR HIGH RESISTANCE
(B137) BPP SENSOR SIGNAL CIRCUIT SHORTED TO GROUND
(B137) BPP SENSOR SIGNAL CIRCUIT SHORTED TO (B937) BPP SENSOR RETURN CIRCUIT
BRAKE PEDAL POSITION (BPP) SENSOR
ANTI-LOCK BRAKE SYSTEM (ABS) MODULE
NOTE:

If DTC C1246-1C is present, perform the appropriate diagnostics for this DTC first before continuing with this diagnostic procedure.