LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Pads And/Or Shoes, Brake >> Removal >> Rear Disc Brake Pads

Rear Disc Brake Pads

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Caliper Adapter, Mounting Bolts & Inboard/Outboard Brake Pad
GC0130657Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support vehicle.
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper.
  4. Remove the caliper. Refer to CALIPER, DISC BRAKE, REMOVAL .
    NOTE:

    Do not allow brake hose to support caliper assembly.

  5. Support and hang the caliper.
  6. Remove the inboard brake pad (3) from the caliper adapter (1).
  7. Remove the outboard brake pad (4) from the caliper adapter (1).
scientia non olet · About LEMON Manuals