LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Pads And/Or Shoes, Brake >> Removal >> Front Pads

Front Pads

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle.
  2. Remove wheel and tire assembly.
  3. Drain small amount of fluid from master cylinder brake reservoir with clean  suction gun.
    Fig 1: Identifying Disc Brake Caliper & Components
    GC0130323Courtesy of CHRYSLER GROUP, LLC
  4. Remove the 2 caliper mounting bolts (3).
  5. Compress the caliper (4) and remove from the adaptor.
  6. Secure caliper (4) to nearby suspension part with wire. Do not allow brake hose to support caliper weight. 
    Fig 2: Caliper Adapter Mounting Bolts, Inboard/Outboard Brake Pads & Caliper Adapter
    GC0130655Courtesy of CHRYSLER GROUP, LLC
  7. Remove the inboard (2) and outboard brake pads (3) from the caliper adapter (4).
  8. Remove the anti-rattle clips from the brake caliper adapter (4).
scientia non olet · About LEMON Manuals