LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Adapter, Disc Brake Caliper >> Removal >> Front

Adapter, Disc Brake Caliper: Removal: Front

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the front wheel and tire assembly.
    Fig 1: Identifying Disc Brake Caliper & Components
    GC0130323Courtesy of CHRYSLER GROUP, LLC
  3. Remove the caliper (4) from the adaptor (3). Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. Remove the disc brake caliper (1) from the adapter (4).
    CAUTION:

    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

    Fig 2: Caliper Adapter Mounting Bolts, Inboard/Outboard Brake Pads & Caliper Adapter
    GC0130655Courtesy of CHRYSLER GROUP, LLC
  5. Remove the inboard (2) and outboard brake pads (3). Refer to PADS AND/OR SHOES, BRAKE, REMOVAL .
  6. Remove the caliper adapter mounting bolts (1).
  7. Remove the caliper adapter (4).
scientia non olet · About LEMON Manuals