LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Adapter, Disc Brake Caliper >> Installation >> Front

Adapter, Disc Brake Caliper: Installation: Front

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Caliper Adapter Mounting Bolts, Inboard/Outboard Brake Pads & Caliper Adapter
GC0130655Courtesy of CHRYSLER GROUP, LLC
  1. Install the caliper adapter mounting bolts (1). Tighten the mounting bolts to 163 N.m (120 ft.lbs).
  2. Install the inboard (2) and outboard pads (3). Refer to PADS AND/OR SHOES, BRAKE, INSTALLATION .
    Fig 2: Identifying Disc Brake Caliper & Components
    GC0130323Courtesy of CHRYSLER GROUP, LLC
  3. Install the caliper (4) to the adapter (3). Refer to CALIPER, DISC BRAKE, INSTALLATION .
  4. Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals