LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Front Suspension & Wheel Alignment) >> Wheel Alignment >> Standard Procedure >> Height Measurement >> Rear Curb Height

Rear Curb Height

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Rear - On each side of the vehicle, measure the distance from the bottom of the jounce bumper cup (1) to the top (2) of the rear axle (3).

Fig 1: Measuring Rear Curb Height
GC0148417Courtesy of CHRYSLER GROUP, LLC
CURB HEIGHT SPECIFICATIONS

MODEL FRONT REAR
4X2 63 mm / +25 mm to -12 mm 102 mm / +25 mm to -12 mm
2.48 in. / + 0.98 to -0.47 in 4.01 in /. + 0.98 to -0.47 in
4X4
Short Wheel Base (SWB)
X / SPORT / SAHARA
115 mm / ±12 mm 130 mm / ±12 mm
4.53 in. / ± 0.47 in 5.12 in. / ± 0.47 in
4X4
Short Wheel Base (SWB)
RUBICON
119mm / ±12 mm 135 mm / ±12 mm
4.69 in. / ± 0.47 in 5.31 in. / ± 0.47 in
4X4
Short Wheel Base (SWB)
DIESEL - ALL
115 mm / ±12 mm 131 mm / ±12 mm
4.53 in. / ± 0.47 in 5.16 in. / ± 0.47 in
4X4
Long Wheel Base (LWB)
X / SPORT / SAHARA
115 mm / ±12 mm 136 mm / ±12 mm
4.53 in. / ± 0.47 in 5.35 in./ ± 0.47 in
4X4
Long Wheel Base (LWB)
RUBICON
119 mm / ±12 mm 140 mm / ±12 mm
4.69 in. / ± 0.47 in 5.51 in. / ± 0.47 in
4X4
Long Wheel Base (LWB)
DIESEL - ALL
115 mm / ±12 mm 137 mm / ±12 mm
4.53 in. / ± 0.47 in 5.39 in. / ± 0.47 in
TOLERANCES

INDIVIDUAL CROSS CAR
± 12 mm
(0.984 in. - 0.47 in)
± 12 mm
(± 0.47 in)